Oce Arizona 250 GT, User Manual

Page: 106 / 178

106 Chapter 6 How to Operate the Roll Media Option
Roll Media Theory of Operations
detected, the move is interrupted, motion stopped, and the user is notified to cut the
media or otherwise remedy the situation.
The Cancel command returns the media tension bar to its original position (this is
assuming the media has not been cut) to be ready for printing. The Load Media
command assumes the media has been cut and therefore goes through the full Load
media function.
Media Manual Feed
This enables the operator to advance or rewind loaded media using the foot-pedal
controls in the initialized control mode. This allows the operator to rewind media in
order to view previously printed images on the printer and to advance back to its
original media position. Press a foot pedal switch to move the media at the lowest
possible speed. Release the switch to decelerate the media to an idle state.
Media End of Roll
The control system automatically detects an end of input roll condition, independent
of media to core attachment method.