Oce 9400-II, User Manual

Page: 70 / 167

70 Océ 9400-II User Manual
Printing files
The Océ 9400-II can be connected to a host environment, which may be either
a stand alone PC/Workstation or a PC/Workstation connected to a network. It
accepts various standard format CAD/CAM vector and EDMS raster data files
from the host environment and converts these into high quality plots (see
figure 27).
[27] Dataflow to the Océ 9400-II
When an Océ 9400-II receives vector (HP-GL, HP-GL/2, Calcomp 906/907),
raster (HP-RTL, TIFF, CALS) or PostScript (PostScript level 2 optional) data
it will generate a plot with the settings (e.g. number of copies, plotter
emulation etc.) as specified on the operator console in Program Mode.
In order to gain maximum flexibility, each plot job can be preceded by remote
control commands to specify the settings to be used for this job. This so-called
header contains job and file specific settings (e.g. number of copies) in Remote
Control Format (RCF) which overrule the settings programmed in Program
Mode.
Application
Software
Océ 9400-II
Pl RCF
Plot
Job
Settings
Plot
File