Oce 9400-II, User Manual

Page: 38 / 167

38 Océ 9400-II User Manual
▼ ▼ ▼ ▼
Setting the bitmap buffer
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
BUFFERS
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
BUFFER
’ menu.
6
Select the ‘
BITMAP BUFFER
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
BITMAP BUFFER
’ menu
8
Select the required bitmap partition using the or button
9
Press ‘next/select’ to confirm the required partition.
10
Press ‘Program’ to leave the main menu.
▼ ▼ ▼ ▼
Activating the new bitmap buffer size
1
Switch the printer off and then on again.
Note:
If you do not restart the printer the new memory allocation is not taken
into account. Any print data in the printer’s memory will be lost when you
switch off the printer.
Note:
The presented memory percentages are only an indication and may vary
a little from one firmware release to another one.
If you experience difficulties to print your files with these settings, then you
can try to change the value knowing that:
■
Increasing the bitmap buffer size, decreases the processing area size.
■
The size of the processing area determines the ability to process complex
files (e.g. larger number of vectors).
■
A high percentage of bitmap partition allocation, allows printing of long
plots without windowing.
■
A low percentage of bitmap partition allocation, means the ability of
processing very complex files (vector and raster).
RAM Min Max
64 31 % (E+ paper) 71 % (2.92 meters on E+ paper)
128 16 % (E+ paper) 78 % (6.41 meters on E+ paper)
256 9 % (E+ paper) 84 % (13.82 meters on E+ paper)