Oce 9400-II, User Manual

Page: 68 / 167

68 Océ 9400-II User Manual
Inverted copies/Blueprints
To copy old blueprints you can select the invert copy mode. To prevent using
this option by mistake, this function is protected. You must first feed the
original and than press the ‘correction’ and the ‘zoom’ button simultaneously.
▼
▼ ▼
▼
Making invert copies
1
Feed the original.
2
Press the ‘correction’ and the ‘zoom’ button at the same time.
The invert copy mode is now active. The copy quantity is reset to 1 (cannot be
changed) and will flash. The auto exposure is automatically switched off.
3
Press the ‘start’ button.
Remove the original after it is returned. The invert copy mode is not longer
active.
Poster mode
When copying originals with large black areas Poster mode ensures an optimal
copy quality by increasing the density of the copy. If required, select this
option.
▼
▼ ▼
▼
Activating Poster mode
1
Press the ‘lighter’ and ‘darker’ button simultaneously.
The Exposure light will flash. The Poster mode is now active.
2
If required you can still modify the exposure level.
3
Feed the original.
4
Press the ‘Start’ button.
▼ ▼ ▼ ▼
De-activating the Poster mode
1
Press the ‘lighter’ and ‘darker’ button again at the same time.
2
Press the ‘Stop/Correction’ button.