Oce 9400-II, User Manual

Page: 60 / 167

60 Océ 9400-II User Manual
Change settings
To perform special copy jobs, the Océ 9400-II offers you the possibility to
change settings, to match your requirements. This section explains in detail
how to change these particular settings.
Number of copies
If you want to have multiple copies from one original you have to enter the
desired number of copies on the scanner operating panel. The quantity of
copies will count down on the operating panel of the printer. The original will
be scanned just once and the required number of copies will be processed.
Refer to ‘Product specifications scanner’ on page 131 for the limitation of
multiple copy jobs.
▼
▼ ▼
▼
Selecting the number of copies
1
Enter the number of copies (1 upto 19) using the ‘+’ or ‘-’ button on the scanner
operating panel.
The display shows the number of copies.
Copying using roll 1 or roll 2
You can select between two rolls by pressing the ‘media’ button. When a roll
is chosen, the copy material is taken from the selected roll.
Note:
Only use paper as specified in ‘Copy material that can be used’ on
page 137.
▼
▼ ▼
▼
Selecting roll 1, roll 2 or manual feed
1
Press the ‘media’ button until the indicator that corresponds with your choice
lights up.