Oce 9400-II, User Manual

Page: 121 / 167

Solving problems 121
Operator recoverable errors (printer)
When the printer detects an error, the printer stops immediately. An error
message will be displayed on the panel. The user has to take action to solve the
problem.
Message Description
ERROR FEED TA-
BLE Paper in feed table or feed table not closed
Remove the paper and/or close the feed table
PAPER REMOVED The paper is removed from the feed table during a
print
PAPER TOO SHORT
The print material is too short
Remove the print material out of the engine
PAPER JAM
Paper jam in the print engine
Remove the paper out of the engine
FEED TABLE OPEN The feed table is not closed properly
Close the feed table
CUTTER ERROR The printer material is not properly cut
Remove the print material
ROLL EMPTY The selected roll is empty
Remove the print material and place a new roll into the
rollunit
PAPER JAM ROLL Paper jam in the rollunit
Remove the print material
ROLLUNIT OPEN
The rollunit is open
Close the rollunit
REFILL TONER
User has to add toner
OPEN ROLLUNIT Open roll unit to remove the paper
CHECK OUTPUT-
TRAY Paper am in the compact output stacker
Remove the paper and press Continue