Oce 9400-II, User Manual

Page: 58 / 167

58 Océ 9400-II User Manual
Starting the copy process
If you press the ‘start’ button without changing any settings, the settings of the
previous copy job will be used or the default settings of the machine:
■
number of copies 1
■
using roll 1
■
zoom 100%
■
synchro cut
■
no leading /trailing edge
■
auto exposure on; exposure setting 0.
Default settings are used in the following situations:
■
after switching on
■
after pressing stop/correct twice
■
after a time-out of 1 minute (since the end of previous copy job has expired).
If the ‘start’ button is pressed and the printer is not busy, the original will be
scanned. After the original is scanned, it will be returned to the operator.
During the scanning process no changes in settings can be made.
When the original is returned completely, it can be removed and a new original
can already be fed and settings programmed.
If the printer is busy at the moment you press the ‘start’ button, the ‘PLEASE
WAIT’ indicator lights up. Printing will resume 1 minute after the copying
process is finished. The scanning will start automatically when the printer is
ready again.