Oce 9400-II, User Manual

Page: 24 / 167

24 Océ 9400-II User Manual
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
CONNECTIONS
’
menu using the or button.
3
Press ‘next/select
’
to enter the ‘
CONFIGURATION
’
menu.
4
Select the ‘C
ONNECTIONS
’ menu using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the ‘
CENTRONICS
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CENTRONICS
’ menu.
8
Select the ‘
ECP
’ mode using the or button.
9
Press ‘next/select’ to enter the ‘
ECP
’ menu.
10
Select the required setting using the or button.
11
Press ‘next/select’ to confirm the selected type.
12
Press ‘Program’ to leave the main menu.
▼ ▼ ▼ ▼
Defining the end of plot time out
Normally, a print file will end with an instruction which tells the printer that
the file is finished.
However, some print data files do not have an end of print instruction. In this
case, the print will be considered as ‘finished’, when the printer does not
receive any more graphic commands on Centronics.
The print time out option, sets the delay after which the print will be considered
as finished. You can choose between: 15, 30, 180 and 500 seconds. Default is
180.
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
CONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select the ‘
CONNECTION
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the ‘
CENTRONICS
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CENTRONICS
’ menu.
8
Select the ‘
PLOT TIME OUT
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
PLOT TIME OUT
’ menu.
10
Select the required plot time out using the or button.
11
Press ‘next/select’ to confirm the selected plot time out.
12
Press ‘Program’ to leave the main menu.