Oce 9400-II, User Manual

Page: 108 / 167

108 Océ 9400-II User Manual
Replot
Normally, once a file has been processed and printed it is discarded. The replot
function overrules the discarding. To make extra copies/prints from the
operating panel. You have to select ‘
REPLOT ENABLE
’.
Default is ‘off’.
▼ ▼ ▼ ▼
Enabling replot
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
REPLOT
’ item using the or button
5
Press ‘next/select’ to enter the ‘
REPLOT
’ menu.
6
Select the required setting using the or button.
7
Press ‘next/select’ to confirm the setting.
8
Press ‘Program’ to leave the main menu.
Setting the number of copies
This option enables you to print multiple prints of the file currently in the
memory of the printer. Default is 0, maximum is 99 prints.
Note:
This option is only active if replotting is enabled.
▼ ▼ ▼ ▼
Defining the number of prints
1
Press ‘Program’ to enter the main menu.
2
Select the ‘#
COPIES
’ item using the or button.
3
Press ‘next/select’ to enter the ‘#
COPIES
’ menu.
4
Select the required number of copies using the or button.
5
Press ‘next/select’ to confirm the number of copies.
6
Press ‘Program’ to leave the main menu.