Oce 9400-II, User Manual

Page: 44 / 167

44 Océ 9400-II User Manual
Cutting the paper to get a straight leading edge
If the paper does not have a straight leading edge, you can cut it off at right
angles from the roll.
▼
▼ ▼
▼
Cutting the paper from roll 1 or roll 2
1
Open the drawer.
2
Feed the paper manually until it is approximately 5 cm above the top drawer.
3
Close the paper drawer.
4
Press ‘Program’ to enter the main menu.
5
Select the ‘
MEDIA SETTINGS
’ item using the or button.
6
Press ‘next/select’ to enter the ‘
MEDIA SETTINGS
’ menu.
7
Select ‘
CUT MEDIA
’ using the or button.
8
Press ‘next/select’ to cut the paper.
9
Open the paper drawer.
10
Remove the scrap of material.
11
Pull back the material until it is visible and positioned correctly (see figure 13
on page 43).
12
Close the drawer.
13
Press the button ‘Cancel/Continue’.
▼
▼ ▼
▼
Reloading roll 2
1
Open the cover to get access to roll 2 (see figure 14).
[14] Opening the lower drawer