Oce 9400-II, User Manual

Page: 94 / 167

94 Océ 9400-II User Manual
▼ ▼ ▼ ▼
Setting the End of Message parameter
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
CALCOMP SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CALCOMP SETUP
’ menu.
8
Select the ‘
END OF MESSAGE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
END OF MESSAGE
’ menu.
10
Select the required value using the or button.
11
Press ‘next/select’ to confirm the selected value.
12
Press ‘Program’ to leave the main menu.
Synchronization code parameter
The synchronization code parameter is significant in all cases where CalComp
format is selected or auto-recognized when select format is set to Auto or a
remote control command for CalComp was sent.
Possible values range from 0 to 63
DEC
inclusive. The selected value is the
decimal equivalent of the byte to be interpreted as the beginning of a block of
print data. The default synchronization code is 2.
▼
▼ ▼
▼
Setting the synchronization code parameter
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
CALCOMP SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CALCOMP SETUP
’ menu.
8
Select the ‘
SYNC CODE
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
SYNC CODE
’. menu.
10
Select the required sync code using the or button.
11
Press ‘next/select’ to confirm the selected sync code.
12
Press ‘Program’ to leave the main menu.