Oce 9400-II, User Manual

Page: 47 / 167

(Re)load media and toner 47
Printing using the manual feed
There are two possibilities to select manual feed:
■
via remote control commands added to the print file (by means of Plot
Director, drivers (see ‘Use of the Scan-to-File option’ on page 75).
■
by changing the ‘MEDIA MODE’ in the program mode.
If the user wants to use manual feed, he has to:
1
program the media settings on the printer, refer to ‘Programming media
settings’ on page 48.
2
send the file.
3
wait until the message ‘FEED SHEET’ appears in the printer display.
4
feed the sheet of paper portrait into the printer.
5
hold the paper until the engine pulls-in the first part of the sheet.
If the user has selected manual feed in a print file, the printer will ask the user
via the operating panel, to feed the sheet into the printer, at the moment this job
is processed. There will be a user-selectable time-out between 30 and 300
seconds on feeding the sheet. Default timeout is 60 seconds. See ‘Setting the
time-out for manual feed’ on page 50. If the user does not feed the sheet within
this time the job is flushed and the next job will be processed.
▼ ▼ ▼ ▼
Inserting print material in the manual feed
1
Feed the print material centrally into the feed table in accordance with the
guidelines (see figure 18).
Note:
The minimum length of the print material must be 420 mm.
[18] Manual feed