Oce 9400-II, User Manual

Page: 26 / 167

26 Océ 9400-II User Manual
▼ ▼ ▼ ▼
Defining the SCSI-2 ID
You can select a number between 0 and 7. The default is 0. Check the
configuration of your computer to find an ID which is not used by another
device on the SCSI-2-bus to which you want to connect the Océ 9400-II.
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
CONFIGURATION
’
menu using the or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’
menu.
4
Select the ‘C
ONNECTIONS
’ menu using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the
SCSI-2
item using the or button.
7
Press ‘next/select’ to enter the SCSI-2 menu.
8
Select the ‘
ID
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
ID
’ menu.
10
Select the required ‘
ID
’ (ranging from 0 to 7) using the or button.
11
Press ‘next/select’ to confirm the selected ‘
ID
’.
12
Press ‘Program’ to leave the main menu.
13
Switch the printer off/on to activate the configured settings.
▼ ▼ ▼ ▼
Defining terminator
The termination should be set to ‘ON’ if the Océ 9400-II is the last device on
the SCSI-2 chain. It should be set to ‘OFF’ when it is placed in between.
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ menu using the or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select the ‘C
ONNECTIONS
’ menu using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTION
’ menu.
6
Select the
SCSI-2
item using the or button.
7
Press ‘next/select’ to enter the SCSI-2 menu.
8
Select the ‘
TERMINATION
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
TERMINATION
’ menu.
10
Select ‘
ON
/
OFF
’ using the or button.
11
Press ‘next/select’ to confirm the required selection.
12
Press ‘Program’ to leave the main menu.
13
Switch the printer off/on to activate the configured settings.