Oce 9400-II, User Manual

Page: 116 / 167

116 Océ 9400-II User Manual
Password
As the printer can be operated in your work environment by users with
different skill levels, three menu access levels can be set for security reasons.
The display menu allows fully authorized users to access these different printer
menu levels, from the locked level to the full menus levels, using passwords.
The short menus level allows access to the display, cancel plot, media settings
and plot menus enabling users to setup outplot parameters, execute the printer
test and demo plot, set the number of copies and cancel the plot in progress.
The password for the short menu is:
‘previous’ .
The full menus level allows access to the display, plot, configuration, cancel
plot and number of copies menu and their sub-menus. The password for the full
menu
is: ‘previous’ .
The locked level locks the entire printer. In this case the printer acts only as an
output device, receiving commands from your workstation via remote control.
While commands cannot be entered on the operating panel, informative
messages are still displayed. The password for the locked menu is:
‘previous’
‘previous’ .
▼ ▼ ▼ ▼
Setting the menu access level
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
DISPLAY
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
DISPLAY
’ menu
.
4
Select the required menu level using the or button.
5
Press ‘next/select’ to confirm.
6
Depending on the selected menu level, a password must be entered.
7
Press ‘next/select’ to confirm the password.
8
Press ‘Program’ to leave the main menu.