Oce 9400-II, User Manual

Page: 114 / 167

114 Océ 9400-II User Manual
Best fit Mode:
In this mode, the drawing will be reduced to fit in either the length or the width
direction of the format loaded in the machine and as long no information is lost
(no clipping). Only plots larger than the loaded paper size are scaled/rotated,
and the others are printed without scaling.
Note:
This mode does not enlarge drawings, but only reduces them.
This option makes no sense with the Nesting option. In fact, if the Nesting is
On, it will never have any result.
This mode prevents clipping of any plot larger than the media loaded on the
machine.
If ‘AUTOSCALE’ is off and if your drawing is larger than the physical
dimensions of the media, the printer will automatically clip the area outside the
margins. The ‘CLIPPING’ message appears on the display while the printer
automatically compensates for the discrepancy. Clipping does not affect the
position of the print origin.
[32] Print clipping
A: Only the left part of the drawing is plotted.
B: The part of the drawing outside the margins is clipped.
A
B