Oce 9400-II, User Manual

Page: 125 / 167

Solving problems 125
Problem solving copier
When an error occurs, the scanner operating panel informs you about the
nature of the problem.
■
if the printer error indicator is on, a jam has occurred in the printer (see
‘Problem solving printer’ on page 120) on how to solve the problem.
■
if the display shows an error code letter E followed by an error code number,
an original jam has occurred in the scanner (see ‘Clearing original jam’ on
page 126)
■
if the display shows a flashing 3-digit error code, a machine error has
occurred in the scanner (see ‘Operator recoverable errors scanner’ on
page 125).
Scanner error
When the scanner detects an error, the machine stops immediately. A flashing
error code will be displayed on the scanner operating panel.
▼ ▼ ▼ ▼
Solving a scanner error
1
Switch off the scanner.
2
Then switch it on again.
If no error number is shown on the display, you can continue scanning.
Operator recoverable errors scanner
Message Description
E1 Original in scanner when switching on the scanner
E2 Original too long
E3 Stop/Correction button pressed during original transport