Oce 9400-II, User Manual

Page: 113 / 167

Advanced printer menu functions 113
6
Select the ‘
TRANSFORM
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
TRANSFORM
’ menu.
8
Select the ‘
SCALING
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
SCALING
’ menu.
10
Select the required scaling method using the or button.
11
Press ‘next/select’ to enter the appropriate menu.
For each scaling method follow the next procedure:
12
Select the required setting using the or button.
13
Press ‘next/select’ to confirm the setting.
14
Press ‘Program’ to leave the main menu.
Note:
If autoscale is selected, x-scaling and y-scaling are not applicable.
Autoscaling
The purpose of Autoscale is to get documents on exact ISO/ANSI/Architect
formats. The scaling factor applied to the X and Y axis is the same. Before
computing this scaling factor, an auto rotation could be performed to get the
best autoscale.
The Media Saver and the Autoscaling Mode are controlled separately but do
interact.
The Autoscale Mode can be activated in two ways;
■
autoscale to a predefined format (ISO/ANSI/Architect)
■
best fit.
The user can combine Autoscale and Autoposition: plots are first autoscaled
(best fit or scale to format, if needed), and then autopositioned (if needed).
Fit to Format Mode:
All the drawings regardless their sizes, are reduced/enlarged to one specific
standard size. This option could be combined with the Media saver
possibilities.
The list of predefined formats depends on the media format selected on the
printer operating panel.
Users can enlarge drawings to poster size to make presentations to large
audience. They can also reduce documents to easily mail them or archive them
in standard A3 or A4 books.