Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 96 / 485

96 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
Configuring the WebAccess Agent Volume Resource to Load and Unload the
WebAccess Agent and Its MTA
The properties of the Volume Resource object define how the WebAccess Agent volume functions
within the cluster, how NLM
TM
programs are loaded and unloaded, and how failover and failback
situations are handled. Complete the following tasks for the WebAccess Agent volume:
Š “Modifying the Volume Resource Load Script for the WebAccess Agent” on page 96
Š
“Modifying the Volume Resource Unload Script for the WebAccess Agent” on page 98
Š “Setting the Failover Path and Policies for the WebAccess Agent” on page 99
Š
“Installing and Configuring the WebAccess Application in a Cluster” on page 100
Modifying the Volume Resource Load Script for the WebAccess Agent
The volume resource load script executes whenever the WebAccess Agent volume comes online.
To set up the load script:
1 In ConsoleOne
®
, browse to and select the Cluster object.
If necessary, click View > Console View to display its contents.
2
Right-click the Volume Resource object ( volume _SERVER), then click Properties > Load to
display the default volume resource load script for the WebAccess Agent volume.
The next step assumes that this is the first time you have edited the load script. If other
GroupWise agents are already running from this volume, some of the modifications have
already been made.
3 Make the following changes to the default load script:
Š
Remove the
trustmig
command. It is not necessary to migrate trustees for the
WebAccess Agent volume. Removing this line helps the load script to execute faster.
Š On NetWare 5.1, if you are using SLP as a short name resolution method, as described in
“Configuring Short Name Resolution” on page 44 , add the
cvsbind add
command for
the WebAccess Agent volume to the load script.
cvsbind add cluster _ volume _SERVER IP_address
Š If you selected
vol :\system
on WebAccess Agent volume as the installation location
( WebAccess Clustering Worksheet items 5 and 7 ), add a
search add
command to add
the new
vol :\system
directory to the server search path.
search add volume :\system
Š If you selected
sys:\system
on each node as the installation location ( WebAccess
Clustering Worksheet items 5 and 7 ) but you are storing the MTA startup file on the
WebAccess Agent volume, add that location to the server search path.
Š If you marked No under Load WebAccess Agent and Its MTA in Protected Memory?
(
WebAccess Clustering Worksheet item 9 ), add the following abend recovery options:
set auto restart after abend = 2
set auto restart after abend delay time = 0
set auto restart down timeout = 60
set developer option = off
These settings provide the best possible handling of GroupWise databases in the event that
an abend should occur within the cluster.