Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual Download Page 164

Page: 164 / 485

164

GroupWise 7 Interoperability Guide

cx (e

11
Ju

ly 20

Monitoring the status of your clustered GroupWise system from your Web browser. See

Chapter 17, “Implementing GroupWise Monitor in a Linux Cluster,” on page 207

Backing up your clustered GroupWise system. See

Chapter 18, “Backing Up a GroupWise

System in a Linux Cluster,” on page 221

14.8 Clustering Quick Checklists

Section 14.8.1, “GroupWise System Quick Checklist,” on page 164

Section 14.8.2, “Domain Quick Checklist,” on page 164

Section 14.8.3, “Post Office Quick Checklist,” on page 165

14.8.1 GroupWise System Quick Checklist

Plan your new clustered GroupWise system.

See

Chapter 13, “Planning GroupWise in a Linux Cluster,” on page 133

Create the primary domain and initial post office in your new clustered GroupWise system.
See

Section 14.1, “Setting Up a New GroupWise System in a Linux Cluster,” on page 143

Set up the agents for the primary domain and the initial post office.
See

Section 14.4, “Installing and Configuring the MTA and the POA in a Cluster,” on

page 146

Modify the cluster resource load scripts:
See

“Modifying the Cluster Resource Load Script for the Agents” on page 152

Modify the cluster resource unload scripts:
See

“Modifying the Cluster Resource Unload Script for the Agents” on page 155

Set up the cluster failover lists and policies.
See

“Setting the Failover List and Policies for the Agents” on page 157

Test your new clustered GroupWise system.
See

Section 14.5, “Testing Your Clustered GroupWise System,” on page 160

Record cluster-specific information in the properties pages of the GroupWise objects that the
information pertains to.
See

Section 14.6, “Managing Your Clustered GroupWise System,” on page 161

14.8.2 Domain Quick Checklist

Plan your new clustered domain.

See

Section 13.3, “Planning a New Clustered Domain,” on page 136

Create the new domain.
See

Section 14.2, “Creating a New Secondary Domain in a Linux Cluster,” on page 144

Set up the MTA for the new domain.
See

Section 14.4, “Installing and Configuring the MTA and the POA in a Cluster,” on

page 146

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE






































































































































































































































































































































































































































































































Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands

Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands