Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual Download Page 205

Page: 205 / 485

Implementing WebAccess in a Linux Cluster

205

cx (e

11
Ju

ly 20

16.7 WebAccess Agent Quick Checklist

Plan the new clustered WebAccess Agent, including the new domain required to house the
WebAccess Agent in a clustering environment.

See

Section 16.2, “Planning the WebAccess Agent in a Linux Cluster,” on page 187

Create the new WebAccess Agent domain.
See

Section 16.3.1, “Creating a Domain for the WebAccess Agent,” on page 191

Set up the MTA for the new WebAccess Agent domain.
See

Section 16.3.2, “Installing the MTA for the WebAccess Agent Domain,” on page 191

Install the WebAccess Agent.
See

Section 16.3.3, “Installing and Configuring the WebAccess Agent in a Cluster,” on

page 191

Modify the WebAccess Agent cluster resource load script.
See

“Modifying the Cluster Resource Load Script for the WebAccess Agent and Its MTA” on

page 196

Modify the WebAccess Agent cluster resource unload script.
See

“Modifying the Cluster Resource Unload Script for the WebAccess Agent and Its MTA” on

page 198

Set up the WebAccess Agent failover list and policies.
See

“Setting the Failover List and Policies for the WebAccess Agent and Its MTA” on

page 199

Double-check the cluster-specific WebAccess Agent object properties.
See

“Verifying WebAccess Agent Object Properties” on page 200

Test the clustered WebAccess Agent.
See

Section 16.4, “Testing the WebAccess Agent in a Linux Cluster,” on page 201

Record cluster-specific information in the properties pages of the GroupWise objects
associated with the WebAccess Agent.

5) MTA Network Information:

MTA IP address

MTA message transfer port

MTA live remote port

MTA HTTP port

Record the MTA network address information that you will need as
you install the MTA.

For more information, see

Section 16.2.5, “Planning the MTA

Installation,” on page 190

6) WebAccess Agent
Network Information:

WebAccess Agent IP
address

WebAccess Agent HTTP
port

Record the WebAccess Agent network address information that you
will need to install the WebAccess Agent.

For more information, see

Section 16.2.6, “Planning the WebAccess

Agent Installation,” on page 190

Item

Explanation

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE






































































































































































































































































































































































































































































































Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands

Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands