manualshive.com logo in svg

Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Share
Download
Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual Download Page 128

128

GroupWise 7 Interoperability Guide

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

7) Shared Volume for Messenger 
Administration:

Cluster Volume IP Address:

Installation Location for Messenger 
Snap-In to ConsoleOne:

Š

/public

 directory

Š

Other directory

If you plan to install the Messenger snap-in to ConsoleOne on 
a shared volume, specify the name (

cluster

_

volume

) of the 

shared volume where you will install it.

Specify the IP addresses of the virtual server 
(

volume

_SERVER.

cluster

) to which the shared volume is tied.

Specify the directory where you will install the Messenger 
snap-in to ConsoleOne on the shared volume.

To review the background information about cluster-enabled 
volumes provided for GroupWise, see 

Section 2.6, “Deciding 

Whether to Cluster-Enable the Shared Volumes Used by 
GroupWise,” on page 27

.

8) Installation Location for Messenger 
Agents:

Š

Each node in the cluster

Š

Shared volume

Mark the location where you will install the Messaging Agent 
software.

For more information, see 

“Deciding Where to Install the 

Messenger Agent Software” on page 120

.

9) Shared Volume for Messenger 
Agents:

Cluster volume IP address:

If you plan to install the Messenger agents on a shared 
volume, specify the name (

cluster

_

volume

) of the shared 

volume.

Specify the IP address of the virtual server 
(

volume

_SERVER.

cluster

) to which the cluster-enabled 

volume is tied.

To review the background information about cluster-enabled 
volumes provided for GroupWise, see 

Section 2.6, “Deciding 

Whether to Cluster-Enable the Shared Volumes Used by 
GroupWise,” on page 27

.

For more information, see 

“Selecting the Messenger Volume” 

on page 121

.

10) Failover Path for Messenger Shared 
Volume:

If you plan to install the Messenger agents on a shared 
volume, list other nodes in the cluster where the Messenger 
agents could fail over.

For more information, see 

“Determining an Appropriate 

Failover Path for the Messenger Volume” on page 121

.

11) IP Address Resolution Methods:

Š

eDirectory

Š

hosts file

Š

DNS

Š

SLP (highly recommended)

Mark the short name address resolution methods you want to 
implement to ensure that the UNC paths stored in ConsoleOne 
can be successfully resolved into physical network addresses.

To review the background information provided for GroupWise, 
see 

Section 2.7, “Ensuring Successful Name Resolution for 

GroupWise Volumes,” on page 29

.

Item

Explanation

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE






































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands