Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 103 / 485

Implementing WebAccess in a NetWare Cluster 103
n
ov
do
cx (e
n)
11
Ju
ly 20
08
on the node where the WebAccess Application is currently running. However, the other nodes on the
WebAccess Application failover path are not currently available for update. therefore, you must
manually copy the updated
commgr.cfg
file to the
sys:\novell\webaccess
subdirectory
on each node in the WebAccess Application failover path.
5.5 WebAccess Clustering Worksheet
Item Explanation
1) Shared Volume for
WebAccess Agent:
Cluster Enabled?
Š
Yes (highly recommended)
Cluster volume IP address
Š
No
Specify the name ( cluster _ volume ) of the shared volume where the
WebAccess Agent domain will be created.
For cluster-enabling, specify the IP addresses of the virtual server
(
volume _. cluster ) to which the cluster-enabled volume is tied.
For more information, see “Deciding Whether to Cluster-Enable the
WebAccess Agent Volume” on page 90 .
2) WebAccess Agent
Domain Name:
Domain Database Location:
Specify a unique name for the WebAccess Agent domain. Specify the
directory on the WebAccess Agent volume where you want to create
the new domain.
For more information, see “Planning a New Domain for the
WebAccess Agent” on page 90 .
3) WebAccess Agent
Failover Path: List other nodes in the cluster where the WebAccess Agent and its
MTA could fail over.
For more information, see “Determining an Appropriate Failover Path
for the WebAccess Agent Volume” on page 91 .
4) MTA Installation Location:
Š
vol :\system
on
WebAccess Agent volume
Š
sys:\system
on each
node
Consolidate multiple MTA
startup files on WebAccess
Agent volume?
Mark the location where you will install the MTA software.
If necessary, specify the location where you will consolidate multiple
MTA startup files on a WebAccess Agent volume.
For more information, see “Deciding Where to Install the WebAccess
Agent and Its MTA” on page 91 .
5) MTA Network Information:
Š
MTA IP address
Š
MTA message transfer port
Š
MTA live remote port
Š
MTA HTTP port
Gather the MTA network address information from the WebAccess
section of the
“IP Address Worksheet” on page 40 .
For more information, see “Planning a Secondary IP Address and
Cluster-Unique Port Numbers for the WebAccess Agent and Its MTA”
on page 91
.
6) WebAccess Agent
Installation Location:
Š
vol :\system
on the
WebAccess Agent volume
Š
sys:\system
on each
node
Mark the location where you will install the WebAccess Agent
software.
For more information, see “Deciding Where to Install the WebAccess
Agent and Its MTA” on page 91 .