Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 46 / 485

46 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
Example
map m: = \\gwvol1_SERVER\gwvol1
When specifying the
map
commands you will need, use System Clustering Worksheet item 7 or 8
for each volume where a domain or post office resides. Use System Clustering Worksheet item 3 for
cluster .
SLP
On NetWare 6. x , Novell Cluster Services automatically propagates virtual server information into
SLP and provides the most reliable name resolution.
On NetWare 5.1, Novell Cluster Services does not propagate virtual server information into SLP by
default. If you want to use SLP for name resolution on NetWare 5.1, you must download the
(unsupported) CVSBIND utility from the Technical Information Document
NWCS Bindery Tool
(http://www.novell.com/support/
search.do?cmd=displayKC&docType=kc&externalId=10062624&sliceId=&dialogID=9016836&st
ateId)
. Install CVSBIND according to the instructions included with the download, then determine
the server-specific commands you will need to use with CVSBIND.
Syntax:
cvsbind add cluster _ volume _SERVER ip_address
cvsbind del cluster _ volume _SERVER ip_address
Remember that cluster _ volume _SERVER represents the name of the virtual server created when
you cluster-enabled the volume.
Example:
cvsbind add gwcluster_gwvol1_SERVER 172.16.5.81
cvsbind del gwcluster_gwvol1_SERVER 172.16.5.81
Later, in “Modifying the Volume Resource Load Script for the Agents” on page 53 and “Modifying
the Volume Resource Unload Script for the Agents” on page 54 , you need to add the
cvsbind
commands to the load and unload scripts for GroupWise volume resources.
3.2 Setting Up a New GroupWise System in a
Cluster
The GroupWise Installation Advisor walks you through setting up the primary domain and an initial
post office in the primary domain. You might be creating your primary domain and initial post office
on the same GroupWise volume or on two different volumes. After you have created the primary
domain and initial post office and installed the GroupWise agents, you can create additional
secondary domains and post offices as needed.
To set up the primary domain and initial post office for a new GroupWise system in a clustering
environment:
1 If necessary, map a drive to each GroupWise administration volume ( System Clustering
Worksheet item 6 ).