Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual Download Page 186

Page: 186 / 485

186

GroupWise 7 Interoperability Guide

cx (e

11
Ju

ly 20

Set up the Internet Agent failover list and policies.
See

“Setting the Failover List and Policies for the Internet Agent and Its MTA” on page 180

Enable Internet Addressing for the clustered Internet Agent.
See

“Enabling Internet Addressing for Your Clustered GroupWise System” on page 180

Double-check the cluster-specific Internet Agent object properties.
See

“Verifying Internet Agent Object Properties” on page 180

Test the clustered Internet Agent.
See

Section 15.3, “Testing the Internet Agent in a Linux Cluster,” on page 182

Record cluster-specific information in the properties pages of the GroupWise objects
associated with the Internet Agent.
See

Section 15.4.1, “Updating GroupWise Objects with Cluster-Specific Descriptions,” on

page 183

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE






































































































































































































































































































































































































































































































Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands

Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands