Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 81 / 485

Implementing the Internet Agent in a NetWare Cluster 81
n
ov
do
cx (e
n)
11
Ju
ly 20
08
2 Right-click the Internet Agent object, then click Properties .
3 Continue with Verifying the Reference to the Volume Resource .
Verifying the Reference to the Volume Resource
In the Internet Agent object properties pages:
1 Click SMTP/MIME > Settings .
2 Verify the contents of the Hostname/DNS "A Record" Name field.
It displays the hostname as currently configured in DNS. It should match the Volume Resource
object name (
volume _SERVER) of the Internet Agent volume, not the name of a physical
server in the cluster.
3 Make changes if necessary.
4 Continue with Verifying the Reference to the Virtual Server .
Verifying the Reference to the Virtual Server
In the Internet Agent object properties pages:
1 Click Server Directories .
2 Verify that the displayed directories match the virtual server name ( cluster _ volume_ SERVER)
associated with the Volume Resource object, not the name of a physical server in the cluster.
3 Make changes if necessary.
4
Continue with Verifying Post Office Links .
Verifying Post Office Links
In the Internet Agent object properties pages:
1
Click Post Office Links .
2 Verify that the Access Mode column displays C/S (for client/server mode) for all post offices
serviced by the Internet Agent.
3 Verify that the Links column displays the secondary IP addresses of the GroupWise volumes
where post offices reside, not the IP addresses of any physical servers in the cluster.
4
Make changes if necessary.
5 Continue with Forcing Use of the Internet Agent Secondary IP Address .
Forcing Use of the Internet Agent Secondary IP Address
If you want the Internet Agent to send outgoing messages on its secondary IP address, rather than
using the default of its primary IP address:
1 Click GroupWise > Network Address .
2 In the TCP/IP Address field, provide the secondary IP address (under Internet Agent Clustering
Worksheet item 1 ) for the Internet Agent to use for sending outgoing messages.
3 Click SMTP/MIME , then click Settings .
4 Select Bind to TCP/IP Address at Connection Time .