Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 124 / 485

124 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
3 Run the Messenger Installation program at an administrator workstation to set up your
Messenger system, following the steps provided in “
Starting the Messenger Installation
Program ” and “ Creating Your Messenger System ” in “ Installing a Novell Messenger System ”
in the Messenger 2.0 Installation Guide . Keep in mind the following cluster-specific details:
Š
When you specify the Messenger installation directory, be sure to browse to the location
through the Messenger volume accessed in
Step 2 above.
Š
When you specify the ConsoleOne directory, be sure to browse to the location through the
Messenger administration volume accessed in
Step 1 above.
Š On the Start Copying Files page, the server object name should be the virtual server name,
not a physical server name.
4 When you have finished creating your Messenger system, continue with Configuring the
Messenger Volume Resource to Load and Unload the Messenger Agents .
Configuring the Messenger Volume Resource to Load and Unload the Messenger
Agents
The properties of the Volume Resource object define how the Messenger volume functions within
the cluster, how the Messenger agents are loaded and unloaded, and how failover and failback
situations are handled.
1 In ConsoleOne, browse to and select the Cluster object.
If necessary, click
View > Console View to display its contents.
2 Right-click the Volume Resource object ( volume _SERVER), then click Properties > Load to
display the default volume resource load script for the Messenger volume.
The volume resource load script executes whenever the Messenger volume comes online.
3 Add the following lines to the load script:
load volume :\novell\nm\ma\nmma.nlm @ volume :novell\nm\ma\strtup.ma
load volume :\novell\nm\aa\nmaa.nlm @ volume :novell\nm\aa\strtup.aa
where volume is the name of the Messenger volume ( Messenger Clustering Worksheet item 9 ).
For example:
load msgr:\novell\nm\ma\nmma.nlm @msgr:novell\nm\ma\strtup.ma
load msgr:\novell\nm\aa\nmaa.nlm @msgr:novell\nm\aa\strtup.aa
As an alternative, you can start both Messenger agents with a single command:
volume :\novell\nm\nmstart.ncf
4 Click Apply to save the load script.
5
Click Unload .
6 Add the following lines to the unload script:
unload nmma.nlm
unload nmaa.nlm
7 Click Apply to save the unload script.
8 Click Nodes to display the default failover path for the Messenger volume.
9 Arrange the nodes in the cluster into the desired failover path for the Messenger volume
(
Messenger Clustering Worksheet item 10 ).