Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual Download Page 165

Page: 165 / 485

Setting Up a Domain and a Post Office in a Linux Cluster

165

cx (e

11
Ju

ly 20

Modify the domain cluster resource load script.
See

“Modifying the Cluster Resource Load Script for the Agents” on page 152

Modify the domain cluster resource unload script.
See

“Modifying the Cluster Resource Unload Script for the Agents” on page 155

Set up the domain failover list and policies.
See

“Setting the Failover List and Policies for the Agents” on page 157

Test your new clustered domain.
See

Section 14.5, “Testing Your Clustered GroupWise System,” on page 160

Record cluster-specific information in the properties pages of the GroupWise objects that the
information pertains to.
See

Section 14.6, “Managing Your Clustered GroupWise System,” on page 161

14.8.3 Post Office Quick Checklist

Plan your new clustered post office.

See

Section 13.4, “Planning a New Clustered Post Office,” on page 137

and

Section 13.5,

“Planning a New Library for a Clustered Post Office,” on page 137

Create the new post office.
See

Section 14.3, “Creating a New Post Office in a Linux Cluster,” on page 145

Set up the POA for the new post office.
See

Section 14.4, “Installing and Configuring the MTA and the POA in a Cluster,” on

page 146

Modify the post office cluster resource load script:
See

“Modifying the Cluster Resource Load Script for the Agents” on page 152

Modify the post office cluster resource unload script:
See

“Modifying the Cluster Resource Unload Script for the Agents” on page 155

Set up the post office failover list and policies.
See

“Setting the Failover List and Policies for the Agents” on page 157

Test your new clustered post office.
See

Section 14.5, “Testing Your Clustered GroupWise System,” on page 160

Record cluster-specific information in the properties pages of the GroupWise objects that the
information pertains to.
See

Section 14.6, “Managing Your Clustered GroupWise System,” on page 161

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE






































































































































































































































































































































































































































































































Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands

Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands