Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 387 / 485

Planning GroupWise in a Microsoft Cluster 387
n
ov
do
cx (e
n)
11
Ju
ly 20
08
System Worksheet ” in “ Installing a Basic GroupWise System ” in the GroupWise 7 Installation
Guide . This covers planning the primary domain and an initial post office in the primary
domain.
Š
Secondary Domain: If your GroupWise system already exists, you will be creating a new
secondary domain. In preparation, review “ Planning a New Domain ”, then print and fill out the
“ Domain Worksheet ” in “ Domains ” in the GroupWise 7 Administration Guide .
Regardless of the type of domain you are creating, keep in mind the following cluster-specific
details as you fill out the worksheet you need:
Š When you specify the location for the domain directory (and for a new GroupWise system, the
post office directory) on the worksheet, include the shared disk where you want the directory to
reside.
Š Do not concern yourself with the GroupWise agent information on the worksheet. You will
plan the agent installation later. If you are filling out the Basic GroupWise System Worksheet,
stop with
item 17 . If you are filling out the Domain Worksheet, stop with item 10 .
When you have completed the worksheet, transfer the key information from the Basic GroupWise
System Worksheet or the Domain Worksheet to the System Clustering Worksheet.
IMPORTANT: Do not create the new domain until you are instructed to do so in Chapter 3,
“Setting Up a Domain and Post Office in a NetWare Cluster,” on page 43 .
41.3 Planning a New Clustered Post Office
The considerations involved in planning a new post office in a Microsoft cluster are essentially the
same as for any other environment. The initial post office in a new GroupWise system is planned on
the Basic GroupWise System Worksheet. To plan additional new post offices, review “
Planning a
New Post Office ”, then print and fill out the “ Post Office Worksheet ” in “ Post Offices ” in the
GroupWise 7 Administration Guide . When you specify the locations for the post office directories,
include the shared disks where you want the post office directories to reside.
When you have completed the worksheet, transfer key information from the Basic GroupWise
System Worksheet or the Post Office Worksheet to the System Clustering Worksheet.
IMPORTANT: Do not create the new post office until you are instructed to do so in Chapter 3,
“Setting Up a Domain and Post Office in a NetWare Cluster,” on page 43 .
SYSTEM CLUSTERING WORKSHEET
Under Item 7: Domain Name , transfer the domain name and directory to the System Clustering
Worksheet.
SYSTEM CLUSTERING WORKSHEET
Under Item 8: Post Office Name , transfer the post office name and directory to the System Clustering
Worksheet.