Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 308 / 485

308 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
5 From the GroupWise 7 Administrator for Linux CD, run the GroupWise Installation program
(
install
), as described in “ Starting the GroupWise Installation Program on Linux ” in
“ Installing a Basic GroupWise System ” in the GroupWise 7 Installation Guide .
IMPORTANT: Do not select the Configure GroupWise for Clustering option at this time.
6
When you set up the software distribution directory, copy all of the agent software.
Although this is not required when creating your initial domain and post office, it makes
installation of the other GroupWise agents easier after you have created the primary domain
and the initial post office.
7
From the GroupWise Installation program, run ConsoleOne to set up your initial GroupWise
system, as described in “
Using ConsoleOne to Create Your Basic GroupWise System ” in
“ Installing a Basic GroupWise System ” in the GroupWise 7 Installation Guide .
8
When providing the MTA and POA network address information, use their secondary IP
addresses (
GroupWise Clustering Worksheet item 3 for the MTA and item 5 for the POA).
The information you provide is used to configure the MTA and POA eDirectory
TM
objects in
the domain and post office even though you have not yet installed the agent software on any
nodes in the cluster.
Do not create users in the post office at this time.
9 When you have finished creating the primary domain and the initial post office, click Finish to
exit the GroupWise Installation program without installing the agent software from the
GroupWise 7 Administrator for Linux CD.
IMPORTANT: You will install the agent software from the software distribution directory that
you just created, not from the CD.
10 Skip to “Running the GroupWise Installation Program on the Preferred Node” on page 147 .
32.2 Creating a New Secondary Domain in a
Heartbeat Cluster
After you have set up the primary domain and initial post office, as described in Chapter 32, “Setting
Up a Domain and a Post Office in a Heartbeat Cluster,” on page 307 , you can create additional
secondary domains in your GroupWise system as needed.