Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 354 / 485

354 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
manually. To resolve the problem, you can run the WebAccess Agent manually on that node, or
you can replace the
@webac70a.waa
with WEBAC70A, being sure to follow the same
format as the other WebAccess Agent section headings in the
gwha.conf
file.
8 When you have installed the WebAccess Agent on all of the nodes where you want it to fail
over, continue with
Configuring Clustered Logging .
Configuring Clustered Logging
The default location for the WebAccess Agent log files is on the nodes along with the WebAccess
Agent software, rather than being located with the domain on the WebAccess Agent shared storage
partition. To avoid having multiple copies of log files in multiple locations, you should set the
location in ConsoleOne
®
.
1 On the WebAccess Agent shared storage partition where the domain is located, create the
directory where you want to store WebAccess Agent log files.
2 In ConsoleOne, browse to and select the Domain object.
3
Right-click the WebAccess Agent object, then click Properties .
4 Click GroupWise > Log Settings .
5 In the Log File Path field, browse to and select the directory you created in Step 1 , then click
OK .
6 Continue with Configuring the Clustered WebAccess Agent for SSL
Configuring the Clustered WebAccess Agent for SSL
If you plan to enable SSL, as described in “ Securing WebAccess Agent Connections with SSL ” in
“ WebAccess ” in the GroupWise 7 Administration Guide , you need to make the SSL certification file
and key file available to the WebAccess Agent in the cluster. The default locations for the SSL
certificate file and key file are on the nodes along with the WebAccess Agent software, rather than
being located with the domain on a shared storage partition. To avoid having multiple copies of
these files in multiple locations, you should set the locations in ConsoleOne.
1 On the WebAccess Agent shared storage partition, create the directory where you want to store
the certificate file and key file required for SSL.
2 Copy the certificate file and key file into the new directory.
If you need assistance obtaining these files, see “
Server Certificates and SSL Encryption ” in
“ Security Administration ” in the GroupWise 7 Administration Guide .
3 In ConsoleOne, browse to and select the Domain object.
4
Right-click the WebAccess Agent object, then click Properties .
5 Click GroupWise > SSL Settings .
6 In the Certificate File field, browse to and select the certificate file.
7 In the SSL Key File field, browse to and select the key file.
8
Click OK .
9 After you have set these locations to the WebAccess Agent partition, continue with Verifying
WebAccess Agent Object Properties .