Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual Download Page 104

Page: 104 / 485

104

GroupWise 7 Interoperability Guide

cx (e

11
Ju

ly 20

5.6 WebAccess Quick Checklist

Plan the new clustered WebAccess installation, including the new domain required to house the
WebAccess Agent in a clustering environment.

See

Section 5.2, “Planning WebAccess in a Cluster,” on page 89

Cluster-enable the volume where the WebAccess Agent domain will reside.
See

Section 5.3.1, “Cluster-Enabling a Shared Volume for Use with the WebAccess Agent,” on

page 93

Create the new WebAccess Agent domain.
See

Section 5.3.2, “Creating a Domain for the WebAccess Agent,” on page 94

Set up the MTA for the new WebAccess Agent domain.
See

Section 5.3.3, “Installing the MTA for the WebAccess Agent Domain,” on page 94

Install the WebAccess Agent.
See

Section 5.3.4, “Installing and Configuring the WebAccess Agent in a Cluster,” on page 94

Modify the WebAccess Agent volume resource load script:

Remove the

trustmig

command

Add the

cvsbind add

command (NetWare 5.1 only; optional)

Add the

search add

command (optional)

If you will

not

run the MTA and the WebAccess Agent in protected memory, add the

set

auto restart

commands and the

set developer option = off

command

Add the

load

commands for the MTA and the WebAccess Agent, separating them with a

delay

command

If you

will

run the MTA and the WebAccess Agent in protected memory, add the

address space

parameter to the

load

commands and add a

protection

restart

command for the address space

See

“Modifying the Volume Resource Load Script for the WebAccess Agent” on page 96

7) WebAccess Agent
Network Information:

WebAccess Agent IP
address

WebAccess Agent HTTP
port

Gather the WebAccess Agent network address information from the
WebAccess section of the

“IP Address Worksheet” on page 40

For more information, see

“Planning a Secondary IP Address and

Cluster-Unique Port Numbers for the WebAccess Agent and Its MTA”
on page 91

8) Load WebAccess Agent and
Its MTA in Protected Memory?

Yes

Protected address space names:

MTA:

WebAccess:

Mark whether you need to run the WebAccess Agent and its MTA in
protected memory. If so, specify a unique address space for each
agent.

For more information, see

“Deciding Whether to Run the WebAccess

Agent and Its MTA in Protected Memory” on page 92

Item

Explanation

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE






































































































































































































































































































































































































































































































Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands

Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Search results

Summary of Contents for GROUPWISE 7 - INTEROPERABILITY GUIDE

Reviews:

Brands by name

Popular brands