Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 56 / 485

56 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
3 Click Apply to save the unload script.
4 If necessary, click OK to confirm that you must offline and then online the volume resource in
order for the changes to take effect.
5 Continue with Setting the Failover Path and Policies for the Agents .
Setting the Failover Path and Policies for the Agents
To modify the failover path and policies for a GroupWise volume resource:
1 In ConsoleOne, in the properties pages for the Volume Resource object ( volume _SERVER),
click Nodes to display the default failover path for the GroupWise volume resource.
2 Arrange the nodes in the cluster into the desired failover path for the domain or post office
volume (under
Agent Clustering Worksheet items 3 or 6 ).
3
Click Apply to save the failover path.
4 Click Policies to display the default start, failover, and failback policies.
The default policy settings are often appropriate. By default, a volume resource:
Š Fails over automatically if the node it is running on fails
Š
Starts automatically on the next node in its failover path
Š Continues running at its failover location, even after its most preferred node is again
available