Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 355 / 485

Implementing WebAccess in a Heartbeat Cluster 355
n
ov
do
cx (e
n)
11
Ju
ly 20
08
Verifying WebAccess Agent Object Properties
During installation of the WebAccess Agent, the WebAccess Agent object should have been
configured correctly. However, it can be helpful to verify certain cluster-specific information in
order to familiarize yourself with the configuration of a clustered WebAccess Agent.
Š
“Accessing WebAccess Agent Object Properties” on page 355
Š
“Verifying Post Office Links” on page 355
Š
“Forcing Use of the Web Access Agent Secondary IP Address” on page 355
Accessing WebAccess Agent Object Properties
1 In ConsoleOne, browse to and select the WebAccess Agent domain in order to display its
contents.
2 Right-click the WebAccess Agent object, then click Properties .
3 Continue with Verifying Post Office Links .
Verifying Post Office Links
In the WebAccess object property page:
1 Click Post Office Links .
2
Verify that the Access Mode column displays C/S (for client/server mode) for all post offices
serviced by the WebAccess Agent.
3 Verify that the Links column displays the secondary IP addresses of the cluster resource group
where post offices reside, not the IP addresses of any nodes in the cluster.
4 Make changes if necessary.
5
Continue with Forcing Use of the Web Access Agent Secondary IP Address .
Forcing Use of the Web Access Agent Secondary IP Address
If you want the WebAccess Agent to always use its secondary IP address, rather than using the
primary IP address:
1 In ConsoleOne, click GroupWise > Network Address .
2 In the TCP/IP Address field, provide the secondary IP address ( WebAccess Agent Clustering
Worksheet item 8 ) for the WebAccess Agent.
3 Select Bind Exclusively to TCP/IP Address .
4 Click OK .
5 Continue with Installing and Configuring the WebAccess Application on Your Web Server .
34.3.5 Installing and Configuring the WebAccess Application
on Your Web Server
The WebAccess Application cannot be installed in a cluster. Follow the standard installation and
configuration instructions in “
Installing and Configuring the WebAccess Application and
WebPublisher Application ” in “ Installing GroupWise WebAccess ” in the GroupWise 7 Installation
Guide .