Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 178 / 485

178 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
exit_on_error add_secondary_ipaddress $RESOURCE_IP
/etc/init.d/grpwise start domain
/etc/init.d/grpwise start domain . gwia
exit 0
Make the following changes to set up the load script for the Internet Agent:
6a
On the
RESOURCE_IP
line, change
123.123.1.1
to the secondary IP address of the
GroupWise partition ( Internet Agent Clustering Worksheet item 1 ).
6b As needed on the
MOUNT_FS
line, change
reiserfs
to whatever file system type is in
use on nodes in the cluster.
6c On the
MOUNT_DEV
line, change
/dev/evms/Share/dat
to the actual device name
in use on nodes in the cluster.
6d On the
MOUNT_POINT
line, change
/mnt/mount_point
to the mount point directory
in use on nodes in the cluster.
6e If you created a domain on the partition, use the following command to start the MTA:
/etc/init.d/grpwise start domain
6f Use the following commands to start the Internet Agent and its MTA:
/etc/init.d/grpwise start domain
/etc/init.d/grpwise start domain . gwia
7 Click OK to save the load script.
Modifying the Cluster Resource Unload Script for the Internet Agent and Its MTA
The cluster resource unload script executes whenever the Internet Agent cluster resource goes
offline. Programs should be unloaded in the reverse order of how they were loaded. This ensures
that supporting programs are not unloaded before programs that rely on them in order to function
properly.
1 On the Cluster Resource Properties page of the Internet Agent cluster resource, click Scripts >
Unload Script .
The default unload script appears as follows:
#!/bin/bash
. /opt/novell/ncs/lib/ncsfuncs
# request service stop
ignore_error /etc/init.d/myservice stop
# stop service otherwise
sleep 8
ignore_error fuser -k /mnt/generic
# del the IP address
ignore_error del_secondary_ipaddress a.b.c.d
# umount the file system
exit_on_error umount /mnt/generic
# return status
exit 0