Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Manual

Page: 238 / 485

238 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
#!/bin/bash
. /opt/novell/ncs/lib/ncsfuncs
/etc/init.d/novell-nmma stop
/etc/init.d/novell-nmaa stop
# define the IP address
RESOURCE_IP=172.16.5.18
# define the mount point
MOUNT_POINT=/mnt/mount_point
sleep 8
ignore_error fuser -k $MOUNT_POINT
# del the IP address
ignore_error del_secondary_ipaddress $RESOURCE_IP
# umount the file system
exit_on_error umount $MOUNT_POINT
# return status
exit 0
Make the following changes to set up the unload script for the Messenger agents.
3a
Use the following command to stop the Messaging Agent:
/etc/init.d/novell-nmma stop
3b Use the following command to stop the Archive Agent:
/etc/init.d/novell-nmaa stop
3c
On the
RESOURCE_IP line,
change
172.16.5.18
to the secondary IP address
used in the load script.
3d On the
MOUNT_POINT
line, change
/mnt/mount_point
to the mount point directory
used in the load script.
3e Adjust the
sleep
command as needed so that the Messenger agents can shut down
normally on your system without being inadvertently killed by the
fuser -k
command
that follows.
3f In the
fuser -k
command (used if the agents do not stop normally), change
-k
to
-mk
.
The
-m
parameter obtains the PID numbers of the processes to kill.
4 Click Apply to save the unload script.
Setting the Failover List and Policies for the Messenger Agents
1 On the Cluster Resource Properties page of the Messenger cluster resource, click General .
The default policy settings are often appropriate. By default, a cluster resource:
Š
Fails over automatically if the node it is running on fails
Š Starts automatically on the next node in its failover list
Š
Continues running at its failover location, even after its most preferred node is again
available