Novell EDIRECTORY 8.8 - GUIDE Page 572 Manual Download

Page: 572 / 574

Configuring GSSAPI with eDirectory

573

ocx (

NU)

ebr
ua

ry
200
6

Specify the name of the principal objects that are to be deleted or use the

Object Selector

icon

to select them.

Select the principal to be deleted.

Click

again to confirm the delete operation or click

Cancel

to cancel the delete operation.

To delete a principal using advanced selection:

In iManager, click

Kerberos Management

Delete Principal

to open the Delete Principal page.

Click

Advanced Selection

Select the object class.

Specify the container that contains the Principal object or use the

Object Selector

icon to select

it.

Click Include subcontainers to include the subcontainers of the container specified in

Step 3

Click

to open the Advanced Selection Criteria window.

Select the type of attribute and the operator from the drop-down list, then provide the
corresponding values.

Click

Add Row

to include more Logic groups to the selection.

Click

to set the filter.

Click

Show Preview

to display the preview of the advanced selection.

Click

again to confirm the delete operation or click

Cancel

to cancel the delete operation.

Setting a Password for the Kerberos Service Principal

If the eDirectory service principal key has been reset in your KDC, you must update the key for this
principal in eDirectory also.

For information on extracting the key, refer to

“Extracting the Key of the Service Principal for

eDirectory” on page 571

In iManager, click

Kerberos Management

Set Principal Password

to open the Set Principal

Password page.

Specify the name of the Principal object for which an individual password has to be set or use
the

Object Selector

icon to select it.

Specify the keytab filename or click Browse to browse the location where the keytab file is
stored.

Do either of the following:

• Specify the name of the keytab file that contains the principal key or click

Browse

to select

the location where the keytab file is stored.
For more information on creating service principals and extracting the keys, refer to

“Creating a Service Principal for an LDAP Server” on page 570

and

“Extracting the Key

of the Service Principal for eDirectory” on page 571

• Specify the password and confirm the password, then select the encryption type and salt

type combination.

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands

Novell EDIRECTORY 8.8 - GUIDE, Manual

Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands