manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 419 / 574

Share
Download
Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 419

420

Novell eDirectory 8.8 Administration Guide

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

-n

(Optional) Do not verify database after restore

Directs the Backup eMTool to restore the database without verifying. The 
transitive vector of this server will not be compared with the one expected by 
other servers in the replica rings it participates in. (For information about 
transitive vectors, see 

“Transitive Vectors and the Restore Verification 

Process” on page 387

). The database is not renamed from RST to NDS 

unless another option is used to do so.

IMPORTANT: 

We do not recommend using this option unless suggested by 

Novell Support.

-v

(Optional) Override restore

Renames the database from RST to NDS without trying to verify. 

IMPORTANT: 

We do not recommend using this option unless suggested by 

Novell Support.

-k

(Optional) Remove lockout on database

Removes the lockout on the NDS database.

restadv

Advanced restore options. (NOTE: The DS agent will be closed for all 
advanced restore options.)

-l 

file_name

(Mandatory) Log filename and path

Specifies the log file to record the results of the restore operation.

-o

(Optional) Open database when finished

Directs the Backup eMTool to open the database when the operation is 
complete. If the restore verification is successful, it opens the restored 
database. If the restore verification fails, this option opens the database that 
was on the machine before the restore was performed. (For an overview of 
the process, see 

“Overview of How the Backup eMTool Does a Restore” on 

page 380

.)

-n

(Optional) Try to verify a previously failed restore

Tries to verify a previously restored RST database.

-m

(Optional) Remove restored DIB files

Removes the RST database if it is present.

-v

(Optional) Override restore

Renames the database from RST to NDS without trying to verify. 

IMPORTANT: 

We do not recommend using this option unless suggested by 

Novell Support.

-k

(Optional) Remove lockout on database

Removes the lockout on the NDS database.

getconfig

Retrieves the current roll-forward log configuration.

Option and Switches

Description

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments