Novell EDIRECTORY 8.8 - GUIDE Page 565 Manual Download

Page: 565 / 574

566

Novell eDirectory 8.8 Administration Guide

ocx (

NU)

ebr
ua

ry
200
6

To add or remove the Kerberos LDAP extensions, use the krbldapconfig utility, which can be found
in the following locations:

• Linux:

extracted_folder

/Linux/nmas/NmasMethods/Novell/GSSAPI/

Kerberos_ldap_extensions/Linux/krbldapconfig

For example:

/misc/eDir88/Linux/nmas/NmasMethods/Novell/GSSAPI/
Kerberos_ldap_extensions/Linux/krbldapconfig

• Solaris:

extracted_folder

/Solaris/nmas/NmasMethods/Novell/GSSAPI/

Kerberos_ldap_extensions/Solaris/krbldapconfig

For example:

/misc/eDir88/Linux/nmas/NmasMethods/Novell/GSSAPI/
Kerberos_ldap_extensions/Solaris/krbldapconfig

• NetWare

and Windows:

For NetWare, you can run krbldapconfig on any other platform.

extracted_folder

/Windows/nmas/NmasMethods/Novell/GSSAPI/

Kerberos_ldap_extensions/Windows/krbldapconfig

For example:

/misc/eDir88/Linux/nmas/NmasMethods/Novell/GSSAPI/
Kerberos_ldap_extensions/Windows/krbldapconfig

To add the Kerberos LDAP extensions, use the following syntax:

krbldapconfig {-i | -u} -D

bind_DN

[-w

bind_DN_password

] [-h

ldap_host

] [-p

ldap_port

] [-e

trusted_root_cert

]

The following table explains the krbldapconfig utility parameters:

Parameter

Description

-i

Adds the Kerberos LDAP extensions to eDirectory.

-u

Removes the Kerberos LDAP extensions from eDirectory.

-D

bind_fdn

Specifies the FDN of the administrator or the user with administrator-
equivalent rights.

This must be in the format cn=admin,o=org.

-w

bind_fdn_password

Specifies the password of the bind FDN (bind_fdn).

-h

ldap_server

Specifies the hostname or IP address of the LDAP server where
Kerberos LDAP extensions must be installed.

-p

port

Specifies the port where the LDAP server is running.

-e

trusted_root_file

Specifies the trusted root certificate filename for the SSL bind.

If you are using an SSL port, specify the -e option.

For more information, refer to

Section E.1.4, “Exporting the Trusted

Root Certificate,” on page 567

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands

Novell EDIRECTORY 8.8 - GUIDE, Manual

Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Related manuals for EDIRECTORY 8.8 - GUIDE

Brands by name

Popular brands