Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 571 / 574

572 Novell eDirectory 8.8 Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
If you have already specified the realm name in Step 2 , leave this field blank.
5 Do either of the following:
• Specify the keytab filename or click Browse to select the location where the keytab file is
stored.
This is the file that contains the key extracted in
“Extracting the Key of the Service
Principal for eDirectory” on page 571 .
• Specify the password, confirm the password, then select the encryption type and salt type
combination.
The password and encryption type/salt type combination must be the same as the those
specified while creating the service principal in the KDC database.
6 Click OK .
Viewing the Kerberos Service Principal Keys
1 In iManager, click Kerberos Management > View Principal Keys to open the View Principal
Keys page.
2 Specify the name of the principal key that is to be viewed or use the Object Selector icon to
select it.
The following information of the principal keys is displayed:
• Principal name
• Key Table
• Number: Serial number of the key in the key table
• Version: Version of the key
• Key Type: Type of this principal key
• Salt Type: Salt type of this principal key
3 Click OK .
Deleting a Kerberos Service Principal Object
You can delete a single object or multiple objects, or perform an advanced selection of the principal
objects to be deleted.
To delete a single principal object:
1 In iManager, click Kerberos Management > Delete Principal to open the Delete Principal page.
2
Click Select a Single Object .
3 Specify the name of the Principal object to be deleted or use the Object Selector icon to select
it.
4 Click OK .
5 Click OK again to confirm the delete operation or click Cancel to cancel the delete operation.
To delete multiple principal objects:
1 In iManager, click Kerberos Management > Delete Principal to open the Delete Principal page.
2 Click Select Multiple Objects .