manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Manual

Get the Novell eDirectory 8.8 Guide manual for free download on our website. This comprehensive manual covers everything you need to know about using Novell eDirectory 8.8, making it easy to navigate and utilize all of its features. Download it now from manualshive.com.

Share
Download
background image

190

Novell eDirectory 8.8 Administration Guide

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

the Navigator frame. When you move the mouse pointer over the icon, you will see a link to the 
remote iMonitor on the remote server. If the server you are gathering information on by proxy is an 
earlier version of eDirectory, no additional icon is shown and you will always need to gather 
information on that server by proxy until it is upgraded to a version of eDirectory that includes 
iMonitor.

Key features of Proxy mode:

• Not every server in the tree must be running iMonitor in order to use most iMonitor features
• Only one server must be upgraded
• There is a single point of access for dial-in
• You can access iMonitor over a slower speed link while iMonitor accesses eDirectory 

information over higher speed links

• Previous NDS version information is accessible
• Server-centric features are available only where iMonitor is installed

7.3.3  iMonitor Features Available on Every Page

You can link to the Agent Summary, Agent Information, Agent Configuration, Trace Configuration, 
DSRepair, Reports, and Search pages from any iMonitor page by using the icons in the Navigator 
frame. You can also log in or link to the Novell Support Web page from any iMonitor page.

Login/Logout: The 

Login

 button is available if you are not logged in. A 

Logout

 button, which closes 

your browser window, is displayed if you are logged in. Unless all browser windows are closed, 
your iMonitor session remains open, and you will not need to log in again. You can see your login 
status on any page by looking at Identity in the Navigator frame.

Support Connection Link: The Novell logo in the upper right corner is a link to the Novell Support 
Connection Web page. This provides a direct link to the Novell Web site for current server patch 
kits, updates, and product-specific support.

7.3.4  NetWare Remote Manager Integration

On NetWare 5 and later servers, a link to NetWare Remote Manager is available to provide you with 
Web-based monitoring, diagnosis, and troubleshooting information for NetWare servers. 

iMonitor is integrated with NetWare Remote Manager in the following ways:

• NetWare Remote Manager’s lightweight Web server (

httpstk.nlm

) provides the first layer 

of the iMonitor architecture on the NetWare platform.

• iMonitor registers with NetWare Remote Manager (

portal.nlm

) so that links to iMonitor 

and other eDirectory-specific information are available through the NetWare Remote Manager 
interface. 
These links are found under the Manage eDirectory section in the Remote Manager interface. 
Links to eDirectory agent health information are also found in the Diagnose Server section 
under Health Monitor in the eDirectory-related categories. 

NetWare Remote Manager also registers with eDirectory, which allows iMonitor and NetWare 
Remote Manager to cross-reference each other for a more seamless movement between each tool.

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EDIRECTORY 8.8 - GUIDE

3M 740 Software preview
740
Brand: 3M Pages: 3
FARONICS DEVICE FILTER MAC Product Data Sheet preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 2
KAPERSKY ADMINISTRATION KIT 6.0 Administrator'S Manual preview
ADMINISTRATION KIT 6.0
Brand: KAPERSKY Pages: 115
On-Q/Legrand DA7559 User Manual preview
DA7559
Brand: On-Q/Legrand Pages: 14
National Instruments NI Spectral Measurements Toolkit User Manual preview
NI Spectral Measurements Toolkit
Brand: National Instruments Pages: 35
Sony D-NF610 - Portable Cd Player Specifications preview
D-NF610 - Portable Cd Player
Brand: Sony Pages: 1
Sony D-NF420 - Portable Cd Player Specifications preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 2
Sony D-NE718CK - Portable Cd Player Specifications preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 2
Sony D-NE520 - Atrac Cd Walkman Portable Player Specifications preview
D-NE520 - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony CPF-IX001 - Wireless PC-Linked Audio System Installation Manual preview
CPF-IX001 - Wireless PC-Linked Audio System
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Installation & Operating Manual preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 20
Sony D-NE718CK - Portable Cd Player Service Manual preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 36
Sony D-NF420 - Portable Cd Player Service Manual preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 38
Sony D-NF610 - Portable Cd Player Operating Instructions Manual preview
D-NF610 - Portable Cd Player
Brand: Sony Pages: 40
Sony D-NE329SP - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 39
Sony Clie Clie Version 2.0 User Manual preview
Clie Clie Version 2.0
Brand: Sony Pages: 57
Sony D-NE718CK - Portable Cd Player Operating Instructions Manual preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 76
Sony D-NE520 - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE520 - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 103

Brands by name

Popular brands

Load more brands