manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 266 / 574

Share
Download
Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 266

Repairing the Novell eDirectory Database

267

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

Issues

Novell SLP is an optional package. The authentication feature is not implemented as a part of the 
Novell SLP package. 

eDirectory is now interoperatible with OpenSLP, and the authentication features of OpenSLP are 
used. 

10.8  Performing Synchronization Operations

The Sync Repair Wizard lets you synchronize a selected replica on the current server, report the 
synchronization status on the current server, report the synchronization status on all servers, perform 
a time synchronization, and schedule an immediate synchronization.

Use the Sync Repair Wizard to perform the following operations:

•

“Synchronizing the Selected Replica on This Server” on page 267

•

“Reporting the Synchronization Status on This Server” on page 267

•

“Reporting the Synchronization Status on All Servers” on page 268

•

“Performing a Time Synchronization” on page 268

•

“Scheduling an Immediate Synchronization” on page 269

10.8.1  Synchronizing the Selected Replica on This Server

Use this operation to determine the complete synchronization status of every server that has a replica 
of the selected partition.

This helps you determine the health of a partition. If all of the servers with a replica of the partition 
are synchronizing properly, the partition is considered healthy. Each server in the replica ring is 
contacted, then each server performs an immediate synchronization to every other server in the 
replica ring.

Servers do not synchronize to themselves. Therefore, the status for the current server's own replica is 
displayed as Host.

1

In Novell iManager, click the 

Roles and Tasks

 button 

.

2

Click 

eDirectory Maintenance Utilities

 > 

Sync Repair

.

3

Specify the server that will perform the operation, then click 

Next

.

4

Specify a username, password, and context for the server where you will perform the operation, 
then click 

Next

.

5

Click 

Sync the Selected Replica on This Server

, then click 

Next

.

6

Follow the online instructions to complete the operation.

10.8.2  Reporting the Synchronization Status on This Server

This operation reports the replica synchronization status for every partition that has a replica on the 
current server.

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments