manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 201 / 574

Share
Download
Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 201

Using Novell iMonitor 2.1

201

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

Send Entry to All Replicas

 resends this entry’s attributes to all other replicas. This process could take 

some time if the object has many attribute values. This does not make all other copies of the object 
identical. It simply allows the other replicas to reconsider each attribute.

Send All 

(visible only if the object being browsed is a partition root and the 

Advanced Mode Option

 

is enabled) resends all entries in this partition to all the servers holding replicas of the partition. This 
does not make all copies of the objects being sent identical. It simply allows the other replicas to 
reconsider each object and its attributes.

7.4.16  Viewing Entries for Synchronization or Purging

From the Change Cache page, you can view a list of entries that this server needs to consider for 
synchronization or purging. This option is available only if the server you are accessing is running 
eDirectory 8.6 or later and the object you are viewing is a partition root. You must have Supervisor 
rights to the NCP

TM

 server to view this page.

Entry Synchronization

 lets you determine why an entry needs to be synchronized.

7.4.17  Viewing Novell Nsure Identity Manager Details

From the DirXML Summary page, you can view a list of any DirXML drivers running on your 
server, the status of each driver, any pending associations, and driver details. 

1

In iMonitor, click DirXML Summary 

.

2

Choose from the following options:

Status

 displays the current state of the specified driver. Possible states include stopped, starting, 

running, shut down, pending, and getting schema.

Start Option

 displays the current startup option specified for the selected driver.

Pending

 displays the number of associations that have not yet been made.

Driver Details Icon displays subscriber and publisher details, XML rules, filters, and pending 
association lists for DirXML drivers running on your server. Details on the first 50 pending 
objects are also displayed on this page. The XML rule details provided on this page can be used 
to determine what to look for in the pending objects to allow their creation to proceed for the 
specified DirXML driver.

7.4.18  Viewing the Synchronization Status of a Replica

From the Replica Synchronization page, you can view the synchronization status of a replica. 

1

In iMonitor, click 

Agent Synchronization

 in the Assistant frame.

2

Click 

Replica Synchronization

 for the partition you want to view.

3

Use the links on this page and in the navigation bar on the left to access other partitions and 
jump through your replica ring.

7.4.19  Configuring and Viewing Reports

From the Reports page, you can view and delete reports run directly on this server. Some reports 
might take a long time to run and can be resource intensive.

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments