Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 534 / 574

The eDirectory Management Toolbox 535
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
Listing eMTools and Their Services
After logging in to a server, you can use the list command to display a list of the services available
on that server.
The list command displays the following eMTools and their services dynamically:
Use -r to force the refresh of the list. Use -t to list service details. Use -f to list just the command
format.
See the following table for sample commands.
Running a Particular Service
You can perform tasks using each of the eMTool services after you have logged in to a server. For
example:
For more information, see the following:
• Section 14.6, “Using the eMBox Client for Backup and Restore,” on page 404
• Section 8.4, “Using the eMBox Client to Merge Trees,” on page 223
• Section 10.10, “Using the eMBox Client to Repair a Database,” on page 273
• “Using the eMBox Client Service Manager eMTool” on page 182
eMTool Description
backup Novell eDirectory Backup eMTool
dsmerge Novell eDirectory Merge eMTool
dsrepair Novell eDirectory Repair eMTool
dsschema Novell eDirectory Schema Operations eMTool
service Novell eDirectory Service Manager eMTool
Command Description
list
Lists the eMTools available on the server.
list -r
Refreshes the eMTool list.
list -t backup
Lists Backup services with details.
list -t dsrepair
Lists DSRepair services with details.
list -t dsmerge -f
Lists DSMerge services with command formats only.
Command Description
dsrepair.rld
Repair local database.
backup.getconfig
Get backup configuration information.