Novell EDIRECTORY 8.8 - GUIDE, Manual

Page: 153 / 574

Novell eDirectory Management Utilities 153
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
-W Prompts for the password of the entry specified by DN .
This option is applicable only for Linux, Solaris, AIX, and HP-UX.
-F filter Specifies an RFC 1558-compliant search filter. If you omit this option, the
search filter defaults to objectclass=*.
-n Does not actually perform a search, but shows what search would be
performed.
-a attribute_list Specifies a comma-separated list of attributes to retrieve as part of the
search. In addition to attribute names, there are three other values:
• Get no attributes (1.1)
• All user attributes (*)
• An empty list gets all nonoperational attributes
If you omit this option, the attribute list defaults to the empty list.
-o attribute_list Specifies a comma-separated list of attributes to be omitted from the search
results received from the LDAP server before they are sent to the engine.
This option is useful in cases where you want to use a wildcard with the -a
option to get all attributes of a class and then remove a few of them from the
search results before passing the data on to the engine.
For example, -a* -o telephoneNumber searches for all user-level attributes
and filters the telephone number from the results.
-R Specifies to not automatically follow referrals. The default is to follow
referrals with the name and password given with the -d and -w options.
-e value Specifies which debugging flags should be enabled in the LDAP client SDK.
For more information, see “ Using LDAP SDK Debugging Flags ”.
-b base_DN Specifies the base distinguished name for the search request. If this option is
omitted, the base DN defaults to " " (empty string).
-c search_scope Specifies the scope of the search request. Valid values are the following:
• One: Searches only the immediate children of the base object.
• Base: Searches only the base object entry itself.
• Sub: Searches the LDAP subtree rooted at and including the base
object.
If you omit this option, the search scope defaults to Sub.
Option Description