manualshive.com logo in svg

Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 402 / 574

Share
Download
Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 402

Backing Up and Restoring Novell eDirectory

403

no

vd

ocx (

E

NU)

  

01

 F

ebr
ua

ry 
200
6

The following is an example of the screen.

8

Follow the online instructions to complete the restore.
If the restore verification fails, see 

Section 14.9, “Recovering the Database If Restore 

Verification Fails,” on page 425

.

NOTE: 

If the server you are restoring shares a replica with a server running an earlier version 

than eDirectory 8.5, the restore log will show a -666 error (incompatible DS version) for that 
replica. For more information on this situation and what you might be able to do, see 

“Restore 

Verification Is Backward Compatible Only with eDirectory 8.5 or Later” on page 388

.

9

If you restored NICI security files, after completing the restore, restart the server to reinitialize 
NICI.

10

Make sure the server is responding as usual.

11

(Conditional) If you are using roll-forward logging on this server, you must re-create your 
configuration for roll-forward logging to make sure it is turned on and the logs are being saved 
in a fault-tolerant location. After turning on the roll-forward logs, you must also do a new full 
backup.
This step is necessary because during a restore, the configuration for roll-forward logging is set 
back to the default, which means that roll-forward logging is turned off and the location is set 
back to the default. The new full backup is necessary so that you are prepared for any failures 
that might occur before the next unattended full backup is scheduled to take place.

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments