Novell EDIRECTORY 8.8 - GUIDE, Manual

Page: 293 / 574

294 Novell eDirectory 8.8 Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
• ConnectionLastUsed (Input Only, Type TIME)
If ConnectionIsAlreadyOpen is TRUE, then ConnectionLastUsed is the last time that a packet
was sent from eDirectory using this connection. Otherwise, it will be 0.
Sample NDS_LIMBER
Before eDirectory runs limber, it queries WAN Traffic Manager to see if this is an acceptable time
for this activity. The traffic type NDS_LIMBER does not have a destination address; it requires a
NO_ADDRESSES policy. If WAN Traffic Manager returns DONT_SEND, limber is put off and
rescheduled.
The following variables are provided:
• Last (Input Only, Type TIME)
The time of last limber since eDirectory started.
• Version (Input Only, Type INTEGER)
The version of eDirectory.
• ExpirationInterval (Output Only, Type INTEGER)
The expiration interval for all connections created while running limber checks.
• CheckEachNewOpenConnection (Output Only, Type INTEGER)
Value Description
TRUE eDirectory determines that it already has a connection to this address
and can reuse that connection.
FALSE eDirectory does not have a connection to this address and must
create one.
Value Description
TRUE ConnectionLastUsed is the time that eDirectory last sent a packet on
this connection.
FALSE ConnectionLastUsed will be 0.
Value Description
<0, 0 Use the default expiration interval (default).
>0 Expiration interval to be assigned to this connection.
Value Description
0 Return Success without calling WAN Traffic Manager, allowing the
connection to proceed normally (default).
1 Call WAN Traffic Manager and let the policies decide whether to allow the
connection.