Novell EDIRECTORY 8.8 - GUIDE Page 235 Manual Download | Manualshive

Page: 235 / 574

background image

236

Novell eDirectory 8.8 Administration Guide

no

vd

ocx (

E

NU)

01

F

ebr
ua

ry
200
6

In the above illustration, ‘finance' and ‘library' are the partitions in the tree. ‘finance' might contain
sensitive data that requires encryption while replicating. You can enable the partition ‘finance' for
encrypted replication. Partitions like ‘library' that might not contain sensitive data need not be
enabled for encrypted replication.

IMPORTANT:

When you enable encrypted replication for a partition, the replication process might

slow down.

You can enable or disable encrypted replication using iManager.

NOTE:

Encrypted Replication is not supported on Netware

®

.

This section provides the following information:

•

Section 9.2.1, “Enabling Encrypted Replication,” on page 236

•

Section 9.2.2, “Adding a New Replica to a Replica Ring,” on page 240

•

Section 9.2.3, “Synchronization and Encrypted Replication,” on page 245

•

Section 9.2.4, “Viewing the Encrypted Replication Status,” on page 245

9.2.1 Enabling Encrypted Replication

To enable encrypted replication, you need to configure a partition for encrypted replication.
Configuration settings are stored in the partition Root object.

You can choose to enable encrypted replication at a partition level or replica level.

The configurations at the partition level are overridden by the configurations at the replica level.
This means, if encrypted replication is

• Enabled at partition level and disabled for specific replicas, then the replication between the

specific replicas happens in clear text.

• Disabled at partition level and enabled for specific replicas, then the replication between the

specific replicas happens in encrypted form.

Table 9-1

Overriding Encrypted Replication Configuration at the Partition Level

This section contains the following procedures:

•

“Enabling Encrypted Replication at the Partition Level” on page 237

•

“Enabling Encrypted Replication at the Replica Level” on page 238

Partition Level

Replica Level

Replication

Enabled

Disabled

Unencrypted

Disabled

Enabled

Encrypted

«
...
233
234
235
236
237
...
»

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EDIRECTORY 8.8 - GUIDE

GPSMAP GPSMAP 196

Brand: Garmin Pages: 4

Brand: Garmin Pages: 2

Pilot User's Android

Brand: Garmin Pages: 150

VCENTER CHARGEBACK 1.5 - API

Brand: VMware Pages: 150

ALTIRIS 6 INVENTORY SOLUTION

Brand: Symantec Pages: 2

MELSOFT FR Configurator2

Brand: Mitsubishi Electric Pages: 230

Brand: Pioneer Pages: 11

APPLICATION STACK 2.0 RELEASE

Brand: Red Hat Pages: 26

NETWORK SATELLITE SERVER 4.0

Brand: Red Hat Pages: 80

NETWORK - USER REFERENCE GUIDE 3.1

Brand: Red Hat Pages: 78

NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Brand: Red Hat Pages: 300

CERTIFICATE 7.3 RELEASE NOTES

Brand: Red Hat Pages: 24

ALTIRIS SECURITY EXPRESSIONS

Brand: Symantec Pages: 4

ALTIRIS IT MANAGEMENT SUITE 7.0 MR1 - S V1.0

Brand: Symantec Pages: 13

Brand: M-Audio Pages: 99

Brand: Access Pages: 16

pcXset - NBX - PC

Brand: 3Com Pages: 26

RegistryBooster 2010

Brand: UNIBLUE Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands