Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 138 / 574

138 Novell eDirectory 8.8 Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
5.6.3 Setting Up a Server Filter
A server replication filter contains the set of eDirectory classes and attributes you want to host on a
server's set of filtered replicas. You can set up a filter from any Server object. For filtered replicas,
you can have only one filter per server. This means that any filter defined for an eDirectory server
applies to all filtered replicas on that server. The filter, however, does not apply to full replicas.
A server's filter man be modified if required, but the operation generates a resynchronization of the
replica and can thus be time consuming. Careful planning of the server's function is recommended.
You can set up or modify a server filter in either of the following ways:
• “Using the Replica View” on page 138
• “Using the Server Object” on page 138
Using the Replica View
1
In Novell iManager, click the Roles and Tasks button .
2 Click Partition and Replicas > Replica View .
3
Specify the name and context of the partition or server that holds the replica you want to
change, then click
OK .
4 Click Edit in the Filter column for the server or partition you want to modify.
5 Add the classes and attributes you want, then click OK.
6 Click Done.
Using the Server Object
1 In Novell iManager, click the Roles and Tasks button .
2 Click eDirectory Administration > Modify Object .
3 Specify the name and context of the server that holds the replica you want to change, then click
OK .
4 Click the Replica tab.
5
If no filter has been defined for this server, click The Filter is Empty to open the Edit Filter
Dialog window, then add the classes and attributes you want.
or
Click
Copy Filter From to browse for an object (such as another server) whose filter you want
to copy.
6 To edit an existing filter, click any hyperlinked item in the filter to open the Edit Filter Dialog
window, then add or remove the classes and attributes you want.
5.7 Viewing Partitions and Replicas
This section contains the following information:
• “Viewing the Partitions on a Server” on page 139
• “Viewing a Partition’s Replicas” on page 139
• “Viewing Information about a Partition” on page 139