Novell EDIRECTORY 8.8 - GUIDE Manual Download Page 243

Page: 243 / 574

244

Novell eDirectory 8.8 Administration Guide

ocx (

NU)

ebr
ua

ry
200
6

In this case, the encrypted replication would already be enabled on the added eDirectory 8.8 server.

Figure 9-9

Adding eDirectory 8.8 Server to eDirectory Replica Ring with Encrypted Replication Enabled

Scenario B:

Adding eDirectory 8.8 Servers to an eDirectory 8.8 Replica Ring with Encrypted

Replication Disabled

In this case, encrypted replication will be disabled on the added eDirectory 8.8 server.

Figure 9-10

Adding eDirectory 8.8 Server to Replica Rings where Encrypted Replication is Disabled.

Scenario C:

Adding eDirectory 8.8 Servers to a Mixed Replica Ring where Master Replica Is an

eDirectory 8.8 Server and Encrypted Replication Is Disabled

In this case, you do not need to enable encrypted replication on the eDirectory 8.8 server you are
trying to add. Refer to

Figure 9-10 on page 244

Scenario D:

Adding eDirectory 8.8 Servers to a Mixed Replica Ring where Master Replica is a

Pre-eDirectory 8.8 Server and Encrypted Replication is Disabled

Pre-

eDirectory

8.8

eDirectory

8.8

eDirectory

8.8

eDirectory

8.8

Pre-

eDirectory

8.8

eDirectory

8.8

eDirectory 8.8 server being

added to the replica ring

No need to enable ER

eDirectory

8.8

eDirectory

8.8

eDirectory

8.8

eDirectory 8.8 ring – ER disabled

similar

eDirectory

8.8

Master

eDirectory

8.8

Mixed ring – ER enabled

Summary of Contents for EDIRECTORY 8.8 - GUIDE































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews:

Novell EDIRECTORY 8.8 - GUIDE, Manual, Page: 243 / 574

Search results

Summary of Contents for EDIRECTORY 8.8 - GUIDE

Reviews: