Novell EDIRECTORY 8.8 - GUIDE, Manual

Page: 170 / 574

170 Novell eDirectory 8.8 Administration Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
<value>Provo</value>
</required-attr>
</create-rule>
</create-rules>
Create Rule 2: The following create rule places three conditions on all add records, regardless of
their base class:
• The record must contain a givenName attribute. If it doesn't, the add fails.
• The record must contain a Surname attribute. If it doesn't, the add fails.
• The record must contain an L attribute. If it doesn't, the attribute is set to a value of Provo.
<create-rules>
<create-rule>
<required-attr attr-name="givenName"/>
<required-attr attr-name="Surname"/>
<required-attr attr-name="L">
<value>Provo</value>
</required-attr>
</create-rule>
</create-rules>
Create Rule 3: The following create rule places two conditions on all records, regardless of base
class:
• The rule checks to see if the record has a uid attribute with a value of ratuid. If it doesn't, the
add fails.
• The rule checks to see if the record has an L attribute. If it does not have this attribute, the L
attribute is set to a value of Provo.
<create-rules>
<create-rule>
<match-attr attr-name="uid">
<value>cn=ratuid</value>
</match-attr>
<required-attr attr-name="L">
<value>Provo</value>
</required-attr>
</create-rule>
</create-rules>
Example Command: If the create rules are saved to an
crl.xml
file, the following command
instructs the utility to use the rules while processing the
1entry.ldf
file and to send the results to
a destination file,
outt1.ldf
.
ice -o -cfile://cr1.xml -SLDIF -f1entry.ldf -c -DLDIF
-foutt1.ldf